admissionregistration

type FailurePolicyType string

type MatchPolicyType string

type MatchResources struct {
	// NamespaceSelector decides whether to run the admission control policy on an object based
	// on whether the namespace for that object matches the selector. If the
	// object itself is a namespace, the matching is performed on
	// object.metadata.labels. If the object is another cluster scoped resource,
	// it never skips the policy.
	//
	// For example, to run the webhook on any objects whose namespace is not
	// associated with "runlevel" of "0" or "1";  you will set the selector as
	// follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "runlevel",
	//       "operator": "NotIn",
	//       "values": [
	//         "0",
	//         "1"
	//       ]
	//     }
	//   ]
	// }
	//
	// If instead you want to only run the policy on any objects whose
	// namespace is associated with the "environment" of "prod" or "staging";
	// you will set the selector as follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "environment",
	//       "operator": "In",
	//       "values": [
	//         "prod",
	//         "staging"
	//       ]
	//     }
	//   ]
	// }
	//
	// See
	// https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
	// for more examples of label selectors.
	//
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	NamespaceSelector *metav1.LabelSelector
	// ObjectSelector decides whether to run the validation based on if the
	// object has matching labels. objectSelector is evaluated against both
	// the oldObject and newObject that would be sent to the cel validation, and
	// is considered to match if either object matches the selector. A null
	// object (oldObject in the case of create, or newObject in the case of
	// delete) or an object that cannot have labels (like a
	// DeploymentRollback or a PodProxyOptions object) is not considered to
	// match.
	// Use the object selector only if the webhook is opt-in, because end
	// users may skip the admission webhook by setting the labels.
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	ObjectSelector *metav1.LabelSelector
	// ResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy matches.
	// The policy cares about an operation if it matches _any_ Rule.
	// +optional
	ResourceRules []NamedRuleWithOperations
	// ExcludeResourceRules describes what operations on what resources/subresources the ValidatingAdmissionPolicy should not care about.
	// The exclude rules take precedence over include rules (if a resource matches both, it is excluded)
	// +optional
	ExcludeResourceRules []NamedRuleWithOperations
	// matchPolicy defines how the "MatchResources" list is used to match incoming requests.
	// Allowed values are "Exact" or "Equivalent".
	//
	// - Exact: match a request only if it exactly matches a specified rule.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy.
	//
	// - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy.
	//
	// Defaults to "Equivalent"
	// +optional
	MatchPolicy *MatchPolicyType
}

type MutatingWebhook struct {
	// The name of the admission webhook.
	// Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where
	// "imagepolicy" is the name of the webhook, and kubernetes.io is the name
	// of the organization.
	// Required.
	Name string

	// ClientConfig defines how to communicate with the hook.
	// Required
	ClientConfig WebhookClientConfig

	// Rules describes what operations on what resources/subresources the webhook cares about.
	// The webhook cares about an operation if it matches _any_ Rule.
	Rules []RuleWithOperations

	// FailurePolicy defines how unrecognized errors from the admission endpoint are handled -
	// allowed values are Ignore or Fail. Defaults to Ignore.
	// +optional
	FailurePolicy *FailurePolicyType

	// matchPolicy defines how the "rules" list is used to match incoming requests.
	// Allowed values are "Exact" or "Equivalent".
	//
	// - Exact: match a request only if it exactly matches a specified rule.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook.
	//
	// - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook.
	//
	// +optional
	MatchPolicy *MatchPolicyType

	// NamespaceSelector decides whether to run the webhook on an object based
	// on whether the namespace for that object matches the selector. If the
	// object itself is a namespace, the matching is performed on
	// object.metadata.labels. If the object is another cluster scoped resource,
	// it never skips the webhook.
	//
	// For example, to run the webhook on any objects whose namespace is not
	// associated with "runlevel" of "0" or "1";  you will set the selector as
	// follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "runlevel",
	//       "operator": "NotIn",
	//       "values": [
	//         "0",
	//         "1"
	//       ]
	//     }
	//   ]
	// }
	//
	// If instead you want to only run the webhook on any objects whose
	// namespace is associated with the "environment" of "prod" or "staging";
	// you will set the selector as follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "environment",
	//       "operator": "In",
	//       "values": [
	//         "prod",
	//         "staging"
	//       ]
	//     }
	//   ]
	// }
	//
	// See
	// https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
	// for more examples of label selectors.
	//
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	NamespaceSelector *metav1.LabelSelector

	// ObjectSelector decides whether to run the webhook based on if the
	// object has matching labels. objectSelector is evaluated against both
	// the oldObject and newObject that would be sent to the webhook, and
	// is considered to match if either object matches the selector. A null
	// object (oldObject in the case of create, or newObject in the case of
	// delete) or an object that cannot have labels (like a
	// DeploymentRollback or a PodProxyOptions object) is not considered to
	// match.
	// Use the object selector only if the webhook is opt-in, because end
	// users may skip the admission webhook by setting the labels.
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	ObjectSelector *metav1.LabelSelector

	// SideEffects states whether this webhook has side effects.
	// Acceptable values are: Unknown, None, Some, NoneOnDryRun
	// Webhooks with side effects MUST implement a reconciliation system, since a request may be
	// rejected by a future step in the admission chain and the side effects therefore need to be undone.
	// Requests with the dryRun attribute will be auto-rejected if they match a webhook with
	// sideEffects == Unknown or Some. Defaults to Unknown.
	// +optional
	SideEffects *SideEffectClass

	// TimeoutSeconds specifies the timeout for this webhook. After the timeout passes,
	// the webhook call will be ignored or the API call will fail based on the
	// failure policy.
	// The timeout value must be between 1 and 30 seconds.
	// +optional
	TimeoutSeconds *int32

	// AdmissionReviewVersions is an ordered list of preferred `AdmissionReview`
	// versions the Webhook expects. API server will try to use first version in
	// the list which it supports. If none of the versions specified in this list
	// supported by API server, validation will fail for this object.
	// If the webhook configuration has already been persisted with a version apiserver
	// does not understand, calls to the webhook will fail and be subject to the failure policy.
	// +optional
	AdmissionReviewVersions []string

	// reinvocationPolicy indicates whether this webhook should be called multiple times as part of a single admission evaluation.
	// Allowed values are "Never" and "IfNeeded".
	//
	// Never: the webhook will not be called more than once in a single admission evaluation.
	//
	// IfNeeded: the webhook will be called at least one additional time as part of the admission evaluation
	// if the object being admitted is modified by other admission plugins after the initial webhook call.
	// Webhooks that specify this option *must* be idempotent, and hence able to process objects they previously admitted.
	// Note:
	// * the number of additional invocations is not guaranteed to be exactly one.
	// * if additional invocations result in further modifications to the object, webhooks are not guaranteed to be invoked again.
	// * webhooks that use this option may be reordered to minimize the number of additional invocations.
	// * to validate an object after all mutations are guaranteed complete, use a validating admission webhook instead.
	//
	// Defaults to "Never".
	// +optional
	ReinvocationPolicy *ReinvocationPolicyType
}

type MutatingWebhookConfiguration struct {
	metav1.TypeMeta
	// Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
	// +optional
	metav1.ObjectMeta
	// Webhooks is a list of webhooks and the affected resources and operations.
	// +optional
	Webhooks []MutatingWebhook
}

type MutatingWebhookConfigurationList struct {
	metav1.TypeMeta
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	metav1.ListMeta
	// List of MutatingWebhookConfiguration.
	Items []MutatingWebhookConfiguration
}

type NamedRuleWithOperations struct {
	// ResourceNames is an optional white list of names that the rule applies to.  An empty set means that everything is allowed.
	// +optional
	ResourceNames []string
	// RuleWithOperations is a tuple of Operations and Resources.
	RuleWithOperations RuleWithOperations
}

type OperationType string

type ParamKind struct {
	// APIVersion is the API group version the resources belong to.
	// In format of "group/version".
	// Required.
	APIVersion string

	// Kind is the API kind the resources belong to.
	// Required.
	Kind string
}

type ParamRef struct {
	// Name of the resource being referenced.
	Name string
	// Namespace of the referenced resource.
	// Should be empty for the cluster-scoped resources
	// +optional
	Namespace string
}

type ReinvocationPolicyType string

type Rule struct {
	// APIGroups is the API groups the resources belong to. '*' is all groups.
	// If '*' is present, the length of the slice must be one.
	// Required.
	APIGroups []string

	// APIVersions is the API versions the resources belong to. '*' is all versions.
	// If '*' is present, the length of the slice must be one.
	// Required.
	APIVersions []string

	// Resources is a list of resources this rule applies to.
	//
	// For example:
	// 'pods' means pods.
	// 'pods/log' means the log subresource of pods.
	// '*' means all resources, but not subresources.
	// 'pods/*' means all subresources of pods.
	// '*/scale' means all scale subresources.
	// '*/*' means all resources and their subresources.
	//
	// If wildcard is present, the validation rule will ensure resources do not
	// overlap with each other.
	//
	// Depending on the enclosing object, subresources might not be allowed.
	// Required.
	Resources []string

	// scope specifies the scope of this rule.
	// Valid values are "Cluster", "Namespaced", and "*"
	// "Cluster" means that only cluster-scoped resources will match this rule.
	// Namespace API objects are cluster-scoped.
	// "Namespaced" means that only namespaced resources will match this rule.
	// "*" means that there are no scope restrictions.
	// Subresources match the scope of their parent resource.
	// Default is "*".
	//
	// +optional
	Scope *ScopeType
}

type RuleWithOperations struct {
	// Operations is the operations the admission hook cares about - CREATE, UPDATE, or *
	// for all operations.
	// If '*' is present, the length of the slice must be one.
	// Required.
	Operations []OperationType
	// Rule is embedded, it describes other criteria of the rule, like
	// APIGroups, APIVersions, Resources, etc.
	Rule
}

type ScopeType string

type ServiceReference struct {
	// `namespace` is the namespace of the service.
	// Required
	Namespace string
	// `name` is the name of the service.
	// Required
	Name string

	// `path` is an optional URL path which will be sent in any request to
	// this service.
	// +optional
	Path *string

	// If specified, the port on the service that hosting webhook.
	// `port` should be a valid port number (1-65535, inclusive).
	// +optional
	Port int32
}

type SideEffectClass string

type ValidatingAdmissionPolicy struct {
	metav1.TypeMeta
	// Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
	// +optional
	metav1.ObjectMeta
	// Specification of the desired behavior of the ValidatingAdmissionPolicy.
	Spec ValidatingAdmissionPolicySpec
}

type ValidatingAdmissionPolicyBinding struct {
	metav1.TypeMeta
	// Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
	// +optional
	metav1.ObjectMeta
	// Specification of the desired behavior of the ValidatingAdmissionPolicyBinding.
	Spec ValidatingAdmissionPolicyBindingSpec
}

type ValidatingAdmissionPolicyBindingList struct {
	metav1.TypeMeta
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	metav1.ListMeta
	// List of PolicyBinding.
	Items []ValidatingAdmissionPolicyBinding
}

type ValidatingAdmissionPolicyBindingSpec struct {
	// PolicyName references a ValidatingAdmissionPolicy name which the ValidatingAdmissionPolicyBinding binds to.
	// If the referenced resource does not exist, this binding is considered invalid and will be ignored
	// Required.
	PolicyName string

	// ParamRef specifies the parameter resource used to configure the admission control policy.
	// It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy.
	// If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied.
	// +optional
	ParamRef *ParamRef

	// MatchResources declares what resources match this binding and will be validated by it.
	// Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this.
	// If this is unset, all resources matched by the policy are validated by this binding
	// When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated.
	// Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.
	// +optional
	MatchResources *MatchResources
}

type ValidatingAdmissionPolicyList struct {
	metav1.TypeMeta
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	metav1.ListMeta
	// List of ValidatingAdmissionPolicy.
	Items []ValidatingAdmissionPolicy
}

type ValidatingAdmissionPolicySpec struct {
	// ParamKind specifies the kind of resources used to parameterize this policy.
	// If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions.
	// If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied.
	// If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.
	// +optional
	ParamKind *ParamKind

	// MatchConstraints specifies what resources this policy is designed to validate.
	// The AdmissionPolicy cares about a request if it matches _all_ Constraint.
	// However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API
	// ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding.
	// Required.
	MatchConstraints *MatchResources

	// Validations contain CEL expressions which is used to apply the validation.
	// A minimum of one validation is required for a policy definition.
	// Required.
	Validations []Validation

	// FailurePolicy defines how to handle failures for the admission policy.
	// Failures can occur from invalid or mis-configured policy definitions or bindings.
	// A policy is invalid if spec.paramKind refers to a non-existent Kind.
	// A binding is invalid if spec.paramRef.name refers to a non-existent resource.
	// Allowed values are Ignore or Fail. Defaults to Fail.
	// +optional
	FailurePolicy *FailurePolicyType
}

type ValidatingWebhook struct {
	// The name of the admission webhook.
	// Name should be fully qualified, e.g., imagepolicy.kubernetes.io, where
	// "imagepolicy" is the name of the webhook, and kubernetes.io is the name
	// of the organization.
	// Required.
	Name string

	// ClientConfig defines how to communicate with the hook.
	// Required
	ClientConfig WebhookClientConfig

	// Rules describes what operations on what resources/subresources the webhook cares about.
	// The webhook cares about an operation if it matches _any_ Rule.
	Rules []RuleWithOperations

	// FailurePolicy defines how unrecognized errors from the admission endpoint are handled -
	// allowed values are Ignore or Fail. Defaults to Ignore.
	// +optional
	FailurePolicy *FailurePolicyType

	// matchPolicy defines how the "rules" list is used to match incoming requests.
	// Allowed values are "Exact" or "Equivalent".
	//
	// - Exact: match a request only if it exactly matches a specified rule.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook.
	//
	// - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version.
	// For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1,
	// and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`,
	// a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook.
	//
	// +optional
	MatchPolicy *MatchPolicyType

	// NamespaceSelector decides whether to run the webhook on an object based
	// on whether the namespace for that object matches the selector. If the
	// object itself is a namespace, the matching is performed on
	// object.metadata.labels. If the object is another cluster scoped resource,
	// it never skips the webhook.
	//
	// For example, to run the webhook on any objects whose namespace is not
	// associated with "runlevel" of "0" or "1";  you will set the selector as
	// follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "runlevel",
	//       "operator": "NotIn",
	//       "values": [
	//         "0",
	//         "1"
	//       ]
	//     }
	//   ]
	// }
	//
	// If instead you want to only run the webhook on any objects whose
	// namespace is associated with the "environment" of "prod" or "staging";
	// you will set the selector as follows:
	// "namespaceSelector": {
	//   "matchExpressions": [
	//     {
	//       "key": "environment",
	//       "operator": "In",
	//       "values": [
	//         "prod",
	//         "staging"
	//       ]
	//     }
	//   ]
	// }
	//
	// See
	// https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
	// for more examples of label selectors.
	//
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	NamespaceSelector *metav1.LabelSelector

	// ObjectSelector decides whether to run the webhook based on if the
	// object has matching labels. objectSelector is evaluated against both
	// the oldObject and newObject that would be sent to the webhook, and
	// is considered to match if either object matches the selector. A null
	// object (oldObject in the case of create, or newObject in the case of
	// delete) or an object that cannot have labels (like a
	// DeploymentRollback or a PodProxyOptions object) is not considered to
	// match.
	// Use the object selector only if the webhook is opt-in, because end
	// users may skip the admission webhook by setting the labels.
	// Default to the empty LabelSelector, which matches everything.
	// +optional
	ObjectSelector *metav1.LabelSelector

	// SideEffects states whether this webhook has side effects.
	// Acceptable values are: Unknown, None, Some, NoneOnDryRun
	// Webhooks with side effects MUST implement a reconciliation system, since a request may be
	// rejected by a future step in the admission chain and the side effects therefore need to be undone.
	// Requests with the dryRun attribute will be auto-rejected if they match a webhook with
	// sideEffects == Unknown or Some. Defaults to Unknown.
	// +optional
	SideEffects *SideEffectClass

	// TimeoutSeconds specifies the timeout for this webhook. After the timeout passes,
	// the webhook call will be ignored or the API call will fail based on the
	// failure policy.
	// The timeout value must be between 1 and 30 seconds.
	// +optional
	TimeoutSeconds *int32

	// AdmissionReviewVersions is an ordered list of preferred `AdmissionReview`
	// versions the Webhook expects. API server will try to use first version in
	// the list which it supports. If none of the versions specified in this list
	// supported by API server, validation will fail for this object.
	// If the webhook configuration has already been persisted with a version apiserver
	// does not understand, calls to the webhook will fail and be subject to the failure policy.
	// +optional
	AdmissionReviewVersions []string
}

type ValidatingWebhookConfiguration struct {
	metav1.TypeMeta
	// Standard object metadata; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata.
	// +optional
	metav1.ObjectMeta
	// Webhooks is a list of webhooks and the affected resources and operations.
	// +optional
	Webhooks []ValidatingWebhook
}

type ValidatingWebhookConfigurationList struct {
	metav1.TypeMeta
	// Standard list metadata.
	// More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	// +optional
	metav1.ListMeta
	// List of ValidatingWebhookConfigurations.
	Items []ValidatingWebhookConfiguration
}

type Validation struct {
	// Expression represents the expression which will be evaluated by CEL.
	// ref: https://github.com/google/cel-spec
	// CEL expressions have access to the contents of the Admission request/response, organized into CEL variables as well as some other useful variables:
	//
	//'object' - The object from the incoming request. The value is null for DELETE requests.
	//'oldObject' - The existing object. The value is null for CREATE requests.
	//'request' - Attributes of the admission request([ref](/pkg/apis/admission/types.go#AdmissionRequest)).
	//'params' - Parameter resource referred to by the policy binding being evaluated. Only populated if the policy has a ParamKind.
	//
	// The `apiVersion`, `kind`, `metadata.name` and `metadata.generateName` are always accessible from the root of the
	// object. No other metadata properties are accessible.
	//
	// Only property names of the form `[a-zA-Z_.-/][a-zA-Z0-9_.-/]*` are accessible.
	// Accessible property names are escaped according to the following rules when accessed in the expression:
	// - '__' escapes to '__underscores__'
	// - '.' escapes to '__dot__'
	// - '-' escapes to '__dash__'
	// - '/' escapes to '__slash__'
	// - Property names that exactly match a CEL RESERVED keyword escape to '__{keyword}__'. The keywords are:
	//	  "true", "false", "null", "in", "as", "break", "const", "continue", "else", "for", "function", "if",
	//	  "import", "let", "loop", "package", "namespace", "return".
	// Examples:
	//   - Expression accessing a property named "namespace": {"Expression": "object.__namespace__ > 0"}
	//   - Expression accessing a property named "x-prop": {"Expression": "object.x__dash__prop > 0"}
	//   - Expression accessing a property named "redact__d": {"Expression": "object.redact__underscores__d > 0"}
	//
	// Equality on arrays with list type of 'set' or 'map' ignores element order, i.e. [1, 2] == [2, 1].
	// Concatenation on arrays with x-kubernetes-list-type use the semantics of the list type:
	//   - 'set': `X + Y` performs a union where the array positions of all elements in `X` are preserved and
	//     non-intersecting elements in `Y` are appended, retaining their partial order.
	//   - 'map': `X + Y` performs a merge where the array positions of all keys in `X` are preserved but the values
	//     are overwritten by values in `Y` when the key sets of `X` and `Y` intersect. Elements in `Y` with
	//     non-intersecting keys are appended, retaining their partial order.
	// Required.
	Expression string
	// Message represents the message displayed when validation fails. The message is required if the Expression contains
	// line breaks. The message must not contain line breaks.
	// If unset, the message is "failed rule: {Rule}".
	// e.g. "must be a URL with the host matching spec.host"
	// If ExpressMessage is specified, Message will be ignored
	// If the Expression contains line breaks. Eith Message or ExpressMessage is required.
	// The message must not contain line breaks.
	// If unset, the message is "failed Expression: {Expression}".
	// +optional
	Message string
	// Reason represents a machine-readable description of why this validation failed.
	// If this is the first validation in the list to fail, this reason, as well as the
	// corresponding HTTP response code, are used in the
	// HTTP response to the client.
	// The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge".
	// If not set, StatusReasonInvalid is used in the response to the client.
	// +optional
	Reason *metav1.StatusReason
}

type WebhookClientConfig struct {
	// `url` gives the location of the webhook, in standard URL form
	// (`scheme://host:port/path`). Exactly one of `url` or `service`
	// must be specified.
	//
	// The `host` should not refer to a service running in the cluster; use
	// the `service` field instead. The host might be resolved via external
	// DNS in some apiservers (e.g., `kube-apiserver` cannot resolve
	// in-cluster DNS as that would be a layering violation). `host` may
	// also be an IP address.
	//
	// Please note that using `localhost` or `127.0.0.1` as a `host` is
	// risky unless you take great care to run this webhook on all hosts
	// which run an apiserver which might need to make calls to this
	// webhook. Such installs are likely to be non-portable, i.e., not easy
	// to turn up in a new cluster.
	//
	// The scheme must be "https"; the URL must begin with "https://".
	//
	// A path is optional, and if present may be any string permissible in
	// a URL. You may use the path to pass an arbitrary string to the
	// webhook, for example, a cluster identifier.
	//
	// Attempting to use a user or basic auth e.g. "user:password@" is not
	// allowed. Fragments ("#...") and query parameters ("?...") are not
	// allowed, either.
	//
	// +optional
	URL *string

	// `service` is a reference to the service for this webhook. Either
	// `service` or `url` must be specified.
	//
	// If the webhook is running within the cluster, then you should use `service`.
	//
	// +optional
	Service *ServiceReference

	// `caBundle` is a PEM encoded CA bundle which will be used to validate the webhook's server certificate.
	// If unspecified, system trust roots on the apiserver are used.
	// +optional
	CABundle []byte
}